Filter
Top Products
Operating the Camera
Switching TCP/UDP Transmission Mode
28
properly when UDP (Unicast) is selected. In that
case, select TCP.
UDP (Multicast): This protocol is selectable when
Multicast streaming (page 41) is On. When UDP
(Multicast) is selected as the transmission port,
RTP (Real-time Transport Protocol) and UDP
multicast techniques are adopted for video/audio
transmission. By selecting it, the network
transmission load of the camera can be reduced. If
a router that does not correspond to the multicast or
a firewall is installed between the camera and the
computer, the video/audio may not play back
properly. In that case, select TCP or UDP
(Unicast).
4
Click OK to close the dialog.
If you do not change the transmission setting, click
Cancel.