Filter
Top Products
Administrating the Camera
Setting the Object Detection Function — Object detection Menu
67
Mode setting section
PTZ position
Select whether object detection is performed under the
individual conditions for each preset position or always
under the same conditions.
Current position: Regardless of the camera position,
object detection always works under the same
conditions.
Preset position: You can set object detection for each
preset position. When Preset position is selected, an
object will not be detected if the camera is not
directed to the preset position.
Note
You cannot select Preset position if no preset position is
stored in the Position tab of the Preset position menu.
Position setting section
Position
Select the preset position you want to set from the drop-
down list. The camera automatically moves to the
selected preset position.
Note
This item is disabled when PTZ position is set to
Current position.
Detection
Select either moving object detection or unattended
object detection for the selected position.
Moving object: Select when you want to perform
moving object detection. When this option is
selected, the moving object setting menu appears.
See “Setting items for moving object detection” on
page 67.
Unattended object: Select when you want to perform
unattended object detection. When this option is
selected, the unattended object setting menu appears.
See “Setting items for unattended object detection”
on page 69.
Setting items for moving object detection
The following setting items appear when Detection is
set to Moving object.
Monitor display
Set the active/inactive window while monitoring a
moving image.
Note
The image displayed on the monitor display has low
resolution.
Window1 to Window4 check boxes
When you check a check box, the corresponding
window (active or inactive window) appears on the
monitor display. You can change the position and size of
the window.
Active: To use the window as an active area in which
moving object detection is performed.
Inactive: To use the window as an inactive area in which
any moving object is ignored. Select Inactive to set
an inactive area inside an active window.
Note
You cannot set all four windows as Inactive windows.
Be sure to set one or more windows as Active
window(s).
Position setting sectionMode setting section
Moving object detection setting section
Unattended object detection setting section
Active or inactive window