Filter
Top Products
Administrating the Camera
Setting the Operations from the Viewer — Trigger Menu
61
Repeat
Select playback repeat time from 1 to 3.
Alarm
Select the alarm to be linked with the voice alert
function.
Sensor input 1: The external sensor that is connected to
sensor input 1 of camera I/O port.
Sensor input 2: The external sensor that is connected to
sensor input 2 of camera I/O port.
Object detection: The alarm detected by the object
detection function.
Click Detection, and the Object detection menu is
displayed to allow you to set the object detection
function (page 65).
Note
In the case where a preset position is specified in
Position at alarm in the Preset position menu, the alarm
event that happens when the camera moves to the preset
position will be invalid.
Effective period
Set the period during which the alarm detection is
effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which the
alarm detection is effective.
Click Schedule, and the menu for the effective
period is displayed. (“Setting the Schedule —
Schedule Menu” on page 63)
OK/Cancel
See “Buttons common to every menu” on page 30.
Setting the Operations
from the Viewer
— Trigger
Menu
Click Trigger in the Administrator menu to display the
Trigger menu.
In this menu, you will select the activities that can be
performed when is clicked on the main viewer.
e-Mail (SMTP)
Checking this box allows you to select e-Mail from the
trigger drop-down list in the main viewer.
By selecting e-Mail and clicking , a still image of the
moment you click is captured, and your e-mail with the
image file attached is sent to the specified mail address.
When you click e-Mail (SMTP), the Trigger-e-Mail
(SMTP) menu is displayed. You can set the necessary
options here. The setting options and setting procedures
are the same as those of the e-Mail (SMTP) menu
(page 50).