Filter
Top Products
Administrating the Camera
Sending an Image via E-mail — SMTP setting Page
31
Setting the FTP Server Function
— FTP server setting Page
You can register up to 10 user names and passwords to
allow logging in the camera using the FTP client
software of the computer.
Built-in memory
Displays the free space of the built-in memory of the
camera.
User ID
Type a user name between 4 and 16 characters.
Password
Type a password between 4 and 16 characters.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Back/OK
See “Buttons common to every setting page” on page
17.
Sending an Image via E-
mail
— SMTP setting Page
When you click SMTP on the Administrator menu, the
SMTP setting page appears.
Use this page to set up for the SMTP function that can
capture and send a still image attached to an E-mail. You
can capture a still image at the moment when a trigger
occurs by an external sensor input, the built-in activity
detection function or a manual trigger button. The
captured still image is sent as an atttachment of the E-
mail. You can also send a still image periodically.
Activating/Deactivating the SMTP
Function — SMTP usage setting
Page
To activate the SMTP function, select Use SMTP
function and click OK. The SMTP setting page
appears.
When you do not use the SMTP function, select Do not
use SMTP function and click OK.
Notes
The frame rate and operability on the main viewer page
may decrease while an image file is being transmitted
via an E-mail.
Setting the SMTP Function
— SMTP setting Page