Filter
Top Products
Administrating the Camera
Transmitting with External Equipment Using the External Serial Terminal — Serial Menu
84
• This camera does not correspond to the daisy chain
connection of a VISCA device. Use the camera and
the controller one-on-one.
Baud rate
Select a baud rate that corresponds to the peripheral
device of serial interface. Selectable baud rates are
shown below.
38400, 19200, 9600, 4800, 2400, 1200 (bps)
Parity bit
Select a parity that corresponds to the peripheral device
of serial interface from among none, odd or even.
Character length
Select the character length that corresponds to the
peripheral device connected to the serial interface from
7 or 8 (bits).
Stop bits
Select the stop bit that corresponds to the peripheral
device connected to the serial interface from 1 or 2
(bits).
OK/Cancel
See “Buttons common to every menu” on page 30.