GB
16 Installing the Camera
To attach the camera to a tripod
Use a tripod with screws meeting either of
the following specifications.
ISO standard: length 4.5 mm ±0.2 mm
ASA standard: length 0.197 inches
• To attach a tripod, use the tripod mounting
screw hole and attach the tripod firmly
with a screwdriver.
• Install the tripod on a flat surface.
To attach a wide conversion lens
The camera’s lens portion is threaded. To
attach the conversion lens you use, align the
lens with those threads, and turn it to the
right to attach it securely.
Acceptable wide conversion lenses should
weigh less than 100 g (4 oz), and should not
exceed the dimensions given in the
illustration below.
In order to prevent the wide conversion lens
from falling, follow the advice given below.
• Consult with an experienced contractor or
installer to take countermeasure to ensure
the wide conversion lens does not come
loose and fall.
• Be sure that the lens is tightened securely,
as far as it will go.
• Do not use a wide conversion lens in an
environment where it is subject to
vibration or shock.
• Check periodically, at least once a year, to
ensure that the connection has not
loosened. If conditions warrant, make this
periodic check more frequently.
Notes
length
Notes
Camera
side
Screw tapping
used to attach
the camera
25 (
31
/
32
)
37 (1
15
/
32
)
51 (2)
Unit: mm (inch)
55 (2
5
/
32
)
3 (
1
/
8
)
37
(1
15
/
32
)