Filter
Top Products
GB
20 Assigning the IP Address to the Camera
Assigning the IP
Address to the
Camera
To connect the camera to a network, you
need to assign a new IP address to the
camera.
Before assigning the IP address, connect the
camera to a computer or a network.
For details, see “Connecting to a Computer
or a Network” (page 17).
You can assign the IP address in two ways:
• Using the setup program stored in
the supplied CD-ROM
For details on the operations, see
“Assigning the IP Address Using the Setup
Program” on page 20.
• Using the ARP (Address Resolution
Protocol) commands
Open the DOS window on the computer and
enter the specified ARP commands.
For details on the operations, see
“Assigning the IP Address to the Camera
Using ARP Commands” in the User’s Guide
stored in the supplied CD-ROM.
For determining the IP address to be
assigned to the camera, consult your system
administrator.
1 Insert the supplied CD-ROM
disc into your CD-ROM drive.
After s short time a window will open
displaying the files on the CD-ROM.
2 Click the Setup icon of IP Setup
Program.
The File Download dialog opens.
3 Click Open.
You cannot install the IP Setup Program
properly if you click Save in the File
Download dialog.
4 Install the IP Setup Program to
your computer following the
wizard displayed.
If “Software License Agreement” is
displayed, read it carefully and accept
the agreement to continue the
installation.
5 Start the IP Setup Program.
The program detects the SNC-RZ25N or
SNC-RZ25P connected on the local
Note
Assigning the IP Address
Using the Setup Program
Note