Filter
Top Products
11
Getting started
, Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
• After charging the battery pack, disconnect the
AC Adaptor from the DC IN jack of your
camera.
To remove the battery pack
Open the battery/“Memory Stick” cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or viewing
time.
• The black portion of the battery remaining
indicator in the illustration shows the actual
remaining time.
• When you switch the LCD screen on/off, it
takes about one minute for the correct battery
remaining time to appear.
• The displayed time remaining may not be
correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-LS5 AC
Adaptor at a temperature of 25°C (77°F).
4
Power cord
(mains lead)
2 To wall outlet (wall socket)
1
/CHG
/CHG lamp
Battery eject lever
Battery pack
Charging time
(min.)
NP-FC11 (supplied) Approx. 150
4
101
S AF
3.1M
60
min