Filter
Top Products
25
Shooting still images
, Center the subject in the frame,
and shoot the image.
To return to normal recording mode
Press B ( ) on the control button again.
The indicator disappears from the LCD
screen.
• Use the LCD screen to shoot when using the
macro feature. If you use the finder, the limits
of what you see and what you actually shoot
may be different.
2
95
VGA
FINE
101
S AF
F2.8
30
60
min
Using the self-timer
, Set the mode dial to , and
press V ( ) on the control
button.
The (self-timer) indicator appears on the
screen.
• If the menu is currently displayed, press MENU
first so that the menu disappears.
• You can also carry out this operation when the
mode dial is set to
, SCN or .
, Center the subject in the frame,
and press the shutter button
fully down.
The self-timer lamp (page 8) flashes and a
beep sounds after you press the shutter
button until the shutter operates
(approximately 10 seconds later).
To cancel the self-timer in the middle
of the operation
Press V ( ) on the control button again.
The indicator disappears from the LCD
screen.
• If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.
1
VGA
101
96
S AF
60
min
2
F2.8
30
VGA
FINE
101
96
S AF
60
min