Filter
Top Products
30
Changing the mode settings
TITLE LANG* <ENGLISH/ FRANÇAIS/ ESPAÑOL/ PORTUGUÊS>
Select the language of the preset titles.
TITLE1 SET*/TITLE2 SET*
Store your own titles.
D ZOOM* <ON/OFF>
• Select ON to activate digital zooming.
• Select OFF to not use the digital zoom. The camcorder goes back to 15x zoom.
REC LAMP* <ON/OFF>
• Select OFF when you do not want the camera recording/battery lamp at the front of
the unit to light up.
• Normally select ON.
AUTO DATE* <ON/OFF>
• Select ON to record the date for 10 seconds after recording has started.
• Select OFF to not record the date.
CLOCK SET*
Reset the date or time.
DEMO MODE* <ON/OFF>
• Select ON to make the demonstration appear.
• Select OFF to deactivate the demonstration mode.
Notes on DEMO MODE
• DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts
about 10 minutes after you set the POWER switch to CAMERA without inserting a
cassette.
Note that you cannot select STBY of DEMO MODE in the menu system.
• You cannot select DEMO MODE when a cassette is inserted in the camcorder.
• If you insert a cassette during the demonstration, the demonstration stops. You can
start recording as usual. DEMO MODE automatically returns to STBY.
To look at the demonstration at once
Eject the cassette, if inserted. Select ON of DEMO MODE and erase the menu display.
The demonstration will begin.
When you turn off the camcorder once, DEMO MODE automatically returns to STBY.