Filter
Top Products
64
1
2
Removing dust from inside the viewfinder
— CCD-TRV62 only
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(2) Clean the surface with a commercially available blower.
Maintenance information and precautions
2
1
To reattach the eyecup
(1) Align the groove on the eyecup with the • mark on the barrel.
(2) Turn the eyecup in the direction of the arrow. Then replace the screw.
2
1
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.