Filter
Top Products
82
123
JUL 4 1997
5min
0min
CLEANING
CASSETTE
NO
CASSETTE
456
789
C:31:00
C:21:00
Warning indicators
If indicators flash in the viewfinder or in the display window, check the following:
≥: you can hear the beep sound when the BEEP is set to ON.
1 The battery is weak or dead.
Slow flashing: The battery is weak.
Fast flashing: The battery is dead.
2 The tape is near the end.
The flashing is slow.
3 The tape has run out.
The flashing becomes rapid.
4 No tape has been inserted.
5 The tab on the tape is out (red).
6 Moisture condensation has occurred.
7 The video heads may be contaminated.
8 Some other trouble has occurred.
Use the self-diagnosis function (p.72).
If the display does not disappear contact
your Sony dealer or local authorized Sony
service facility.
9 The lithium battery is weak or is not
installed.
To watch the demonstration
You can start the demonstration by setting DEMO MODE in the menu system.
You can also start the demonstration by the following operation.
To enter demo mode
(1) Eject the cassette and set the POWER switch to VTR.
(2) Turn STANDBY up to STANDBY.
(3) While holding down · set the POWER switch to CAMERA.
To exit demo mode
(1) Set the POWER switch to VTR.
(2) Turn STANDBY up to STANDBY.
(3) While holding down π set the POWER switch to CAMERA.