Filter
Top Products
15
Recording a picture (p. 39)
Monitoring the playback picture on the LCD
screen (p. 55)
Note
Do not pick up your
camcorder by the LCD
panel, the battery pack, the
flash or the jack cover.
2Press of the touch panel to
rewind the tape.
3Press of the touch panel to start
playback.
Note
When using the touch panel, press
operation buttons lightly with your
thumb or the supplied stylus (DCR-IP55E
only) supporting the LCD screen from the
rear of it. Do not press the LCD screen
with sharp objects other than the stylus
supplied (DCR-IP55E only).
1Remove the lens cap.
4Slide OPEN in the direction
of the B mark indicated on
the camcorder to open the
LCD panel. The picture
appears on the LCD screen.
When you purchase your camcorder, the clock setting is not
set up yet. Set the clock setting before recording (p. 31).
Viewfinder
When the LCD panel is closed,
use the viewfinder.
Adjust the viewfinder lens to
your eyesight (p. 43).
2Turn the grip to the
recording position, and
hold your camcorder
through the wrist strap.
3Set the POWER
switch to CAMERA.
The CAMERA lamp
lights up.
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
5Press START/STOP. Your
camcorder starts recording.
To stop recording, press
START/STOP again.
START/STO
P
1Set the POWER switch to
VCR.
The VCR lamp lights up.
MEMORY/
NET-
WORK
CAMERA
(CHG)
POWER
OFF
ON
MODE
VCR
Quick Start Guide