Filter
Top Products
15
Recording – Basics
5
3
40min
REC
0:00:01
24
VTR
OFF
MEMORY
CAMERA
POWER
1
— Recording – Basics —
Recording a picture
Your camcorder automatically focuses for you.
(1) Remove the lens cap by pressing both knobs on its sides and attatch the lens
cap to the grip strap.
(2) Install the power source and insert a cassette. See “Step 1” and “Step 2” for
more information (p. 9 to p. 14).
(3) Set the POWER switch to CAMERA while pressing the small green button.
Your camcorder is set to the standby mode.
(4) Slide OPEN in the direction of the ” mark. Then, open the LCD panel. The
viewfinder automatically turns off.
(5) Press START/STOP. Your camcorder starts recording. The “REC” indicator
appears. The camera recording lamp located on the front of your camcorder
lights up. To stop recording, press START/STOP again.
Microphone
Camera recording
lamp