Filter
Top Products
84
Using a Memory Stick–introduction
Your camcorder can format (initialize) a “Memory Stick”. If you format a “Memory
Stick”, all data stored in the “Memory Stick” will be deleted. This function is conveninet
when you want to delete all data including protected images.
New “Memory Stick”s are already formatted so that formatting is not required for
them.
Sample images are stored in the supplied “Memory Stick”. Note that these images will
be deleted if you format the “Memory Stick”.
Formatting (initializing) a Memory Stick
(1) Insert a Memory Stick into your camcorder.
(2) Set the POWER switch to MEMORY. Make sure that the lock is set to the left
(unlock) position.
(3) Press MENU to make the MENU display appear.
(4) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select FORMAT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial again to select OK, then press the dial. The
display shows “EXECUTE.”
(7) Press the SEL/PUSH EXEC dial. The display shows “FORMATTING,” and
formatting procedure begins. When formatting is finished, the display shows
“COMPLETE.”
Check the contents of the “Memory Stick” befor formatting
Note that all data in the “Memory Stick” including protected images will be deleted.
While “FORMATTING” is disolayed
Do not turn the POWER switch nor press any button.
Notes
You cannot format the Memory Stick if the write-protect tab on the Memory Stick is set
to LOCK.