Filter
Top Products
102
Viewing images
The macro function does
not work.
• The (Twilight mode) or (Landscape
mode) is selected for the Scene Selection
function.
p Set it to other settings (page 64).
The eyes of the subject
come out red.
— p Set [Red Eye Reduction] in the SET UP settings to [On] (pages
28 and 116).
The date and time are
recorded incorrectly.
• The date and time are not set correctly. p Set the correct date and time (page 16).
The F value and shutter
speed flash when you
press and hold the shutter
button halfway down.
• The exposure is incorrect. p Correct the exposure (page 51).
Symptom Cause Solution
Symptom Cause Solution
Your camera cannot play
back images.
• The mode dial is not set to .
• Your camera cannot play back image files
copied from the hard disk of your computer if the
folder/file name has been changed or the image
has been modified.
• The camera is in USB mode.
p Set it to (page 32).
—
p Cancel USB communication (page 94).
The image appears rough
right after playback starts.
— p This is not a malfunction.
The image does not
appear on the TV screen.
• The video output signal setting of your camera in
the SET UP settings is incorrect.
• The connection is not correct.
p Change the setting (pages 41 and 118).
p Check the connection (page 34).
The image cannot be
played back on a
computer.
— p See page 103.
Unknown beeps are heard
from the camera while
viewing a movie.
• These beeps are heard when the auto focus is
working.
p This is not a malfunction. Shoot the image using the focus preset
(page 50).