67
Advanced still image shooting
To confirm recording of images
shot in the Exposure Bracket or
Burst 3 modes
You can confirm whether to record each of
the images by pressing
b/B in step 5 and
displaying the three images in order.
Using an external
flash
Mode dial: /P/S/A/M/SCN
Using an external flash will allow you to
shoot more vivid flash pictures than when
using an internal flash.
• The flash does not strobe when shooting in
Burst 3, Exposure Bracket, (Twilight
mode), MPEG Movie or Multi Burst mode.
• You cannot have an external flash and the built-
in flash strobe at the same time.
• Note that when shooting with two or more
external flashes, the camera functions may not
operate normally, or the camera may
malfunction.
• You can carry out this operation even when the
mode dial is set to (Clip Motion).
Using the Sony HVL-F32X
Flash
You can mount the Sony HVL-F32X flash
on the advanced accessory shoe of your
camera. The HVL-F32X is also equipped
with automatic flash level adjustment and
AF fill light shooting functions.
a Mount the HVL-F32X external
flash on the advanced
accessory shoe.
b Turn on the HVL-F32X.
c Set the mode dial to , P,
S,
A, M or SCN.
d Shoot the image.
• When using a Sony optional external flash,
check that [Hot Shoe] is set to [Off] in the SET
UP settings.
Confirm
Delete
Record
1/3
BRK
BACK/NEXT
OK
60
min
FINE
101
5.0M
Shutter
Mode dial
Control
button
Advanced
accessory
shoe
ACC jack