Filter
Top Products
16
On the battery pack
Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn o the
(Movie) lamp/ (Still) lamp (p. 17)/
ACCESS lamp (p. 25).
e CHG (charge) lamp ashes during
charging, or Battery Info (p. 14) will not
be correctly displayed under the following
conditions:
e battery pack is not attached correctly.
e battery pack is damaged.
e battery pack is worn-out (for Battery Info
only).
e power will not be supplied from the
battery as long as the AC Adaptor is connected
to the DC IN jack of your camcorder or
the Handycam Station (DCR-SR65/SR85),
even when the power cord (mains lead) is
disconnected from the wall outlet (wall socket).
When attaching an optional video light, it is
recommended that you use an NP-FH70/FH100
battery pack (DCR-SR65/SR85).
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25°C (77 ˚F) (10°C to 30°C (50 ˚F to 86 ˚F) is
recommended).
e available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
e available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. is may cause a malfunction.
Even if your camcorder is turned o, AC power
source (mains) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.