Filter
Top Products
Utilizing recording media
53
Preventing data on the hard disk of the camcorder
from being recovered
[ EMPTY] allows you to write
unintelligible data onto the hard disk of
the camcorder. In this way, it may become
more dicult to recover any original
data. When you dispose of or transfer the
camcorder to others, it is recommended
that you perform [ EMPTY].
Notes
If you perform [ EMPTY], all the images are
deleted. To avoid the loss of important images,
they should be saved (p.
36) before performing
[
EMPTY].
You cannot perform [ EMPTY] unless you
connect the AC Adaptor to the wall outlet (wall
socket).
Disconnect all cables except the AC Adaptor.
Do not disconnect the AC Adaptor during the
operation.
While performing [ EMPTY], do not apply
any vibrations or shocks.
1 Connect the AC Adaptor to the DC
IN jack on your camcorder and a
wall outlet (wall socket).
2 Turn on your camcorder.
Tips
You can perform this operation, whichever
position of the
(Movie) lamp/ (Still)
lamp is lit.
3 Touch (HOME) (MANAGE
MEDIA) [MEDIA FORMAT]
[HDD].
e [
FORMAT] screen appears.
4 Press and hold the (back light)
button for a few seconds.
e [
EMPTY] screen appears.
5 Touch [YES] [YES].
6 When [Completed.] appears, touch
.
Notes
e actual performing time for [ EMPTY] is
as follows:
DCR-SR45:
approx. 30 minutes
DCR-SR46/SR65:
approx. 40 minutes
DCR-SR85:
approx. 60 minutes
If you stop performing [ EMPTY] while
[Executing…] appears, be sure to complete the
operation by performing [MEDIA FORMAT]
or [
EMPTY] when you use the camcorder
next time.