Filter
Top Products
Customizing your camcorder
61
FILE NO. (File number)
SERIES
Assigns le numbers of still images in
sequence even if the “Memory Stick PRO
Duo” is replaced with another one. e
le number is reset when a new folder is
created or the recording folder is replaced
with another.
RESET
Assigns le numbers in sequence,
following the largest le number existing
on the current recording media.
NIGHTSHOT LIGHT
See page 57.
GUIDEFRAME
See page 58.
FLASH MODE (DCR-SR65/SR85)
You can set this function to record still
images when you use an external ash
(optional) that is compatible with your
camcorder. Attach the external ash to the
Active Interface Shoe (p.
98).
ON (
)
Flashes every time.
AUTO
Flashes automatically.
FLASH LEVEL (DCR-SR65/SR85)
You can set this function when you use an
external ash (optional) that is compatible
with your camcorder.
HIGH (
)
Makes the ash level higher.
NORMAL ( )
LOW(
)
Makes the ash level lower.
REDEYE REDUC (DCR-SR65/
SR85)
You can set this function when you
record still images using an external ash
(optional) that is compatible with your
camcorder. Set to [ON], and select [AUTO]
or [ON] for the ash mode; appears
on the screen. You can prevent redeye by
activating the pre-ash before recording.
Notes
e redeye reduction may not produce the
desired eect due to individual dierences and
other conditions.