Sony DCR-SR65 Camcorder User Manual


 
78
Set the camcorder onto the Handycam
Station securely (DCR-SR65/SR85) (p. 13).
The CHG (charge) lamp ashes while
the battery pack is being charged.
Attach the battery pack to the camcorder
correctly (p. 13). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. e battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
e temperature of the environment is too
high or too low. is is not a malfunction.
e battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p.
13).
e indicated time may not be correct
depending on the environment of use.
The battery pack is quickly discharged.
e temperature of the environment is too
high or low. is is not a malfunction.
e battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p.
13).
LCD screen
Menu items are grayed out.
You cannot select grayed items in the
current recording/playback situation.
ere are some functions you cannot
activate simultaneously (p. 81).
The buttons do not appear on the
touch panel.
Touch the LCD screen lightly.
Press DISP/BATT INFO on your
camcorder (or DISPLAY on the Remote
Commander) (DCR-SR65/SR85) (p.
19).
The buttons on the touch panel do not
work correctly or do not work at all.
Adjust the touch panel ([CALIBRATION])
(p. 93).
“Memory Stick PRO Duo”
You cannot operate functions using the
“Memory Stick PRO Duo.”
If you use a “Memory Stick PRO Duo”
formatted on a computer, format it again
on your camcorder (p.
52).
You cannot delete images stored on or
format the “Memory Stick PRO Duo.”
e maximum number of images that you
can delete on the index screen at one time
is 100.
You cannot delete images that have write-
protection set by another device.
The data le name is not indicated
correctly or ashes.
e le is damaged.
e le format is not supported by your
camcorder (p. 90). Use the supported le
format.
Recording
Refer also to “Memory Stick PRO Duo”
(p. 78).
Pressing START/STOP or PHOTO does
not record images.
e playback screen is displayed. Set your
camcorder to recording standby (p. 26).
e recording media is full. Delete
unnecessary images (p. 37).
Total number of movies or still images
exceeds the recordable capacity of the
media (p.
60, 89). Delete unnecessary
images (p.
37).
While [DROP SENSOR] (p. 67) is
activated, you cannot record images.