Filter
Top Products
Operation
Loading the Paper Roll and Ink Ribbon
12
Note
If you use the 2UPC-R154/R154H or 2UPC-R156/
R156H Printing Pack with the 152-mm (6-inch) paper
width after using the 2UPC-R153/R153H or 2UPC-
R155/R155H Printing Pack with the 127-mm (5-inch)
paper width, picture quality may deteriorate.
To load the paper roll and ink ribbon
Notes
• Be careful that your fingers or clothing are not pinched
or caught by the front door or the protuberance on the
front door.
• When ejected printouts are left on the paper tray,
remove them before opening the front door so that
they are not scratched or folded.
• Since the thermal head is still very hot just after
printing is finished, be careful not to touch the thermal
head when loading the paper and ink ribbon and be
careful not to damage the thermal head.
1
Pull the lock lever for the front door toward you to
open the front cover, and then pull the top cover.
2
Pull the lock lever for the ribbon base located on the
front of the ribbon base and pull up the ribbon base.
3
Pull the paper cartridge of the printer toward you.
Thermal head