Filter
Top Products
Miscellaneous
List of Messages
30
Optional accessories
Self-Laminating Color Printing Pack
2UPC-R153 series
2UPC-R154 series
2UPC-R155 series
2UPC-R156 series
Design and specifications are subject to change without
notice.
List of Messages
Messages appear on the LCD under the following
conditions. Please take the remedial actions shown next
to the message to correct the problem.
Messages and error messages causing
the ALARM indicator to turn on
When the ALARM indicator on the front panel lights in
red, a message or an error message appears on the LCD.
Please take the remedial actions shown next to the
message to correct the problem.
Message Description and Remedy
CHECK PAPER Paper corresponding to the designated
number of sheets has been used up.
tLoad a new ink ribbon and paper
roll. (page 8)
CHECK PAPER &
RETRY
• Paper cannot be fed or ejected
correctly.
tLoad the paper roll correctly.
(page 11)
• The end of the paper may be folded
or bent.
tCheck whether or not the paper
is folded or bent. If it is, cut the
folded part of the paper off and
load the paper roll again.
(page 11)
CHECK RIBBON • The ink ribbon may have broken.
tRepair it with adhesive tape.
(page 16)
• Ink ribbon corresponding to the
designated number of sheets has
been used up.
tLoad a new ink ribbon and paper
roll. (page 8)
• The ink ribbon is not loaded
correctly.
tLoad it correctly. (page 8)
DOOR OPEN The front door is open.
tClose the front panel until it is
locked securely (page 14).
MECHA TROUBLE Mechanical trouble has occurred in the
printer.
t Contact your supplier or the
nearest Sony Service Center.
MEDIA MISMATCH An incompatible ink ribbon and paper
roll are loaded.
tLoad the compatible ink ribbon and
paper roll taken from the same
package. (page 29)
NO PAPER There is no paper roll loaded.
tLoad a paper roll. (page 8)
NO RIBBON There is no ink ribbon loaded.
tLoad an ink ribbon. (page 8)