Sony WHG-SLK1I Camcorder User Manual


 
WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
104
GB
Specications
Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(WHG-SLK1i e United States model
only)
With 8 ohm loads, both channels driven,
from 120 10,000 Hz; rated 35 watts per
channel minimum RMS power, with no
more than 1% total harmonic distortion
from 800 milliwatts to rated output.
Amplier section
e following measured at AC 120 V, 60 Hz
(North American model)
e following measured at AC 127 V, 60 Hz
(Mexican model)
e following measured at AC 127 V
240 V, 60 Hz (Brazilian model)
e following measured at AC 220 V
240 V, 50/60 Hz (European, Korean,
Argentine, ai and Australian models)
e following measured at AC 120 V
240 V, 50/60 Hz (Other models)
WHG-SLK2i
Brazilian model:
Power output (rated):
85 W + 85 W (at 6 Ω, 1 kHz,
1% THD)
RMS output power (reference):
100 W + 100 W (per channel at 6 Ω,
1 kHz, 10% THD)
Other models:
Power output (rated):
85 W + 85 W (at 6 Ω, 1 kHz,
1% THD)
RMS output power (reference):
120 W + 120 W (per channel at 6 Ω,
1 kHz)
WHG-SLK1i
e United States model:
RMS output power (reference):
65 W + 65 W (per channel at 8 Ω,
1 kHz)
Other models:
Power output (rated):
40 W + 40 W (at 8 Ω, 1 kHz,
1% THD)
RMS output power (reference):
65 W + 65 W (per channel at 8 Ω,
1 kHz)
Inputs
VIDEO/SAT VIDEO IN:
1 Vp-p, 75 Ω
VIDEO/SAT AUDIO IN:
voltage 250/450 mV, impedance
47 kΩ
Outputs
DVD VIDEO OUT:
max. output level 1 Vp-p, unbalanced,
Sync negative, load impedance 75 Ω
PHONES:
accepts headphones of 8 Ω or more
SPEAKERS:
Use only the supplied speakers
SS-SLK2i (WHG-SLK2i) or SS-SLK1i
(WHG-SLK1i).