Sony WHG-SLK1I Camcorder User Manual


 
WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
85
GB
Additional Information
Additional Information
Troubleshooting
Should you encounter a problem with
your system, do the following:
1
Make sure the power cord and
speaker cords are connected
correctly and rmly.
2
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
3
If the system still does not operate
properly, reset the system (page 95,
96).
If the problem persists aer doing all
of the above, consult your nearest Sony
dealer.
If the STANDBY indicator ashes
Immediately unplug the power cord,
and check the following items.
Are you using only the supplied
speakers?
Is anything blocking the ventilation
hole on the rear of the system?
Aer the STANDBY indicator stops
ashing, reconnect the power cord,
and turn on the system. If the issue
persists, contact your nearest Sony
dealer.
General
The images with Sony illumination
appear after you connect the power
cord, even though you have not
turned on the system.
Turn o the automatic demonstration
(page 25).
The system does not turn on.
Is the power cord plugged in?
It takes some time for the home
menu screen to appear when you
turn on the system.
is is not a malfunction. e system
takes a certain time for readying and
displaying the home menu when you
turn on the system. Wait for a while
and do not attempt to press  again
as the system will already be in the
process to display the home menu.
Continued