Filter
Top Products
WHG-SLK2i/WHG-SLK1i.GB.4-187-068-11(1)
87
GB
Additional Information
The sound from the component
connected to the VIDEO/AUDIO IN
jacks is distorted.
If “Video Input” is displayed on the
home menu, switch the mode to
“Satellite” (see “To switch between
the “Video Input” and “SAT Input”
function” (page 84)).
“Over Current!” appears.
A problem has been detected with the
level of electrical current from the iPod
connector, (USB) port or memory
card terminal on the unit. Turn o
the system and remove the iPod, USB
device or memory card from the
system. Make sure there is no problem
with these devices. If this display
pattern persists, contact your nearest
Sony dealer.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
Place the speakers as symmetrically as
possible.
Check that the speakers are connected
securely and correctly.
e source being played back is
monaural.
Disc Player
The system does not eject the disc
and “LOCKED” appears.
Consult your nearest Sony dealer or
local authorized Sony service facility.
Playback does not start.
Check whether a disc is loaded.
Wipe the disc clean (page 100).
Reload the disc.
Load the disc that this system can play
back (page 9, 32).
Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
Press to start playback.
e region code on the DVD VIDEO
does not match the system.
The sound skips.
Wipe the disc clean (page 100).
Reload the disc.
Move the unit to a place without
vibrations (e.g., on top of a stable
stand).
Move the speakers away from the
unit, or place them on separate stands.
When you listen to a track or le
with bass sounds at high volume, the
speaker vibration may cause the sound
to skip.
Continued