Filter
Top Products
20
GUI application
Shortcut keys
When you connect a USB keyboard with this unit, you
can use the following shortcut keys in the GENERAL
screen:
Shortcut Applicable button
Alt + M Month
Alt + S SAVE
Alt + C CANCEL
Alt + H HELP
You can move between the items in the screen by
pressing the tab key.
NETWORK screen
This screen is used for setting the XCI-SX1/V3 when
connecting it to a LAN.
This screen consists of three areas for the following
settings:
•LAN (Local Area Network)
•SNMP (Simple Network Management Protocol)
•NTP (Network Time Protocol)
1 LAN
The basic settings for connecting to the network are
made in this area.
DHCP Mode: Set if you obtain the IP address
automatically from the DHCP server or a fixed IP
address.
Host Name: Host name
IP Address: Fixed IP address
Network Mask: Network mask
Gateway Address: Gateway address
DNS Address: DNS server address
Notes
•At the factory, the DHCP Mode is set to Auto and the
XCI-SX1/V3 gets an IP address from a DHCP server
automatically. When there is no DHCP server on
your network, set DHCP Mode to Off and input the
fixed IP address.
•Reboot the XCI-SX1/V3 when the network settings
are changed after getting the IP address from the
DHCP server.
2 SNMP (Simple Network Management Protocol)
The setting to make the agent service effective is made
in this area.
SNMP Mode: Select “On” to make the agent service
effective.
TRAP Destination: SNMP management station
address used to receive trap notifications
1
23456
7
8