Filter
Top Products
21
GUI application
Community: Community name administrated by the
SNMP manager
Description: Description of this unit
Location: Location of this unit
Contact: Administrator contact information
3 NTP (Network Time Protocol)
The protocol setting to synchronize the internal clock
of this unit with the NTP server is made in this area.
Input the time zone and effective NTP server. Press
the SYNCHRONIZE button to synchronize.
NTP Mode: Select “On” to synchronize internal clock
with by the NTP server.
Time Zone: Select your time zone.
Timeout: Timeout value
Sync Interval: Renewal cycle
NTP Server: NTP server address
Notes
•When NTP mode is set to “On”, you cannot change
the date and time in the GENERAL screen.
•When the network you are using is in your intranet
proxy connection environment, you cannot connect
this unit with a NTP server on the Internet.
Therefore, specify the NTP server operated in the
intranet.
4 SYNCHRONIZE button
This button is used to activate the synchronization of
the set values.
5 SAVE button
This button is used to save the currently set values.
6 CANCEL button
This button is used to cancel changes.
7 ? (HELP) button
This button is used to display HELP information.
8 Software Keyboard
Enters alphabets or numbers.
Shortcut keys
When you connect a USB keyboard with this unit, you
can use the following shortcut keys in the NETWORK
screen:
Shortcut Applicable button
Alt + D DHCP
Alt + N SYNCHRONIZE
Alt + S SAVE
Alt + C CANCEL
Alt + H HELP
You can move between the items in the screen by
pressing the tab key.
SERIAL I/F screen
This screen is used for setting the serial interface
communication speed.
1 Baud Rate
Set the baud rate here.
You can select one of the following baud rates:
[4800, 9600, 19200, 38400, 57600, 115200] (bps)
2 SAVE button
This button is used to save the currently set values.
3 CANCEL button
This button is used to cancel changes.
4 ? (HELP) button
This button is used to display HELP information.
Shortcut keys
When you connect a USB keyboard with this unit, you
can use the following shortcut keys in the SERIAL I/F
screen:
Shortcut Applicable button
Alt + S SAVE
Alt + C CANCEL
Alt + H HELP
1
23
4