Filter
Top Products
3-2
P 300 STD/FZY/PRO Scanner Product Reference Guide
Using ADF Bar Codes
When you program a rule, make sure the rule is logically correct. Plan ahead before you start
scanning.
To program each data formatting rule:
1.
Start the Rule
.
Scan the
Begin New Rule
bar code on page 3-11.
2.
Criteria
. Scan the bar codes for all pertinent criteria. Criteria can include code type
(e.g., Code 128), code length, or data that contains a specific character string (e.g.,
the digits “129”). These options are described in
Criteria
on page 3-14.
3.
Actions
. Scan all actions related to, or affecting, these criteria. The actions of a rule
specify how to format the data for transmission. These options are described in
Actions
on page 3-25.
4.
Save the Rule
. Scan the
Save Rule
bar code on page 3-11. This places the rule in the
“top” position in the rule buffer.
If you make errors during this process, some special-purpose bar codes may be useful:
Erase
Criteria and Start Again
,
Erase Actions and Start Again
,
Erase Previously Saved Rule
, and
Erase All Rules
. See
Erase
on page 3-12.
Beeper Definitions for ADF
on page 3-8 help guide you through the programming steps.