Symbol Technologies P 300STD Photo Scanner User Manual


 
D-1
Appendix D
Technical Specifications
Table D-1. Technical Specifications
Item Description
Power Requirements*
PC Wedge/Synapse
RS-232C/Synapse
Low Power
4.5 to 5.5 VDC (max) 200 mA @ 5V typical
4.5 to 5.5 VDC (max) 190 mA @ 5V typical
4.5 to 5.5 VDC (max) 400 mA @ 5V typical
Decode Capability The P 300FZY and P 300PRO can be programmed to
decode the following code types: UPC/EAN, Bookland
EAN, Code 39, Code 39 Full ASCII, Trioptic Code 39,
Code 93, Codabar, Interleaved 2 of 5, Code 128, EAN
128, Discrete 2 of 5, MSI Plessey, and PDF417. Set code
length(s) for any linear code type. The P 300FZY and 300PRO
can auto-discriminate between all of the above code types
except for Code 39 and Code 39 Full ASCII. Transmission of
decoded information depends on the capabilities of the
attached terminal.
Beeper Operation User-selectable: Enabled, Disabled
Scan Repetition Rate 36 scans/sec
Scan Angle ±37°
Roll (Skew) Tolerance ±45° from normal
Pitch ±60° from normal
Yaw ±30° from normal
1-D Decode Depth of Field See P 300STD Decode Zone on page D-3