Filter
Top Products
141
Glossary
#
199 AV1: External input for the TANDBERG/LOEWE monitor.
2nd monitor: The second monitor of your videoconferencing system. The second monitor is
normally placed on the right side of the first monitor.
4CIF: 4 times CIF, 704x576 pixels
4SIF: 4 times SIF, 704x480 pixels
A
AACLD: Advanced Audio Coding Low Delay
Access code: Use Access code to password protect outgoing calls.
Accessories box: The cabinet contains the following: W.A.V.E. camera, table microphone,
remote control and tracker and documentation.
Accessories drawer: See Accessories box
AES: Strong encryption. (Advanced Encryption Standard)
AGC: Automatic Gain Control. Maintains the audio signal level at a fixed value by attenuating
strong signals and amplifying weak signals. Very weak signals, i.e. noise alone, will
not be amplified.
Alert speaker: The internal speaker will warn you of an incoming call even though the
monitor may not be switched on.
Audio call: Audio call equals a telephone call. You can make a call with the video system
with audio only.
Audio input 4: Intended for connection to an external microphone amplifier or an external
fixed mixer.
Audio input 5: Intended for connection to external playback devices or to telephone add-on
hybrids.
Audio out 1: Intended for connection to TANDBERG Natural Audio, televisions or audio
amplifiers.
Audio out 2: Intended for connection to audio recording equipment or to a telephone add-on
hybrid.
Audio out 3: Intended for connection to a VCR or other recording equipment.
Auto-display snapshot: Sent and received snapshot will automatically appear on full screen
display.
Auto answer: The system will automatically answer all incoming calls.
Automatic Duo Video: Duo Video Mode is put to Auto. When starting a presentation, Duo
Video will start automatically (if possible).
B
Bandwidth: Decides the quality of the video call. High bandwidth gives high quality.
C