Filter
Top Products
TANDBERG 1500 MXP
64
VGA Monitor Format
To fully leverage your wide screen display, activate the Native 16:9 format by setting the VGA
Monitor Format to Wide. Note that you should only change this setting if your VGA monitor is
a wide screen (16:9) monitor or projector. The VGA and DVI output will then be optimized for
Wide Screen VGA display.
Normal
Output format is optimized for Normal VGA monitors (4:3)
Wide
Output format is optimized for Wide VGA monitors (16:9)
Wide screen VGA or TV monitor in Normal (stretched) mode.
Wide screen VGA or TV monitor In Wide (native) mode.
VGA Out Quality
The supported range of VGA formats will be optimized for the VGA display monitor based on
the source image.
VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is
recommended to keep this setting in Auto unless your screen doesn’t support some of the
XGA or SVGA formats the system is using. Note that the VGA Out port support VESA Power
Management.
Auto
VGA output format will be optimized dependant of the video source
format, refresh and of the EDID information available.
Supported formats are:
SVGA (800x600) 75Hz
SVGA (800x600) 90Hz
XGA (1024x768) 60Hz
XGA (1024x768) 75Hz
SVGA
VGA output format is forced to SVGA format (800x600) 75Hz