Filter
Top Products
D14640.01—MARCH 2010
10
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents Introduction Physical interface Cables Connecti to codec Video formats Daisy chaining Appendices Contact us
www.tandberg.com
Camera cables
HDMI cable
The HDMI cable delivered with the camera is 5 meters.
Maximum length is 15 meter with a category 2 certified good
quality HDMI cable.
HD–SDI cable
The HD-SDI cable must be purchased separately. The maximum
recommended length of HD–SDI cable is 100 meters.
HDMI to DVI–D adapter
The HDMI to DVI–D adapter is used when connecting to a
TANDBERG MXP Codec or TANDBERG Video Switch.
Making your own cables
If you must assemble your own cables, the tables show the pin-out required.
Pin-out—TANDBERG camera cable
RJ45 (8 pin) to D-SUB
Signal
name
RJ45
pin
D-SUB
pin
+12Vdc 1
Twisted
pair
4
GND 2 5
RX 3
Twisted
pair
2
TX 6 3
NC 4
Twisted
pair
1
NC 5 6
GND 7
Twisted
pair
5
+12Vdc 8 4
Pin-out—VISCA Camera control
RJ 45 8 pins shielded modular jack
Pin Signal name
8 +12V (2.8mA current source when
connected in daisy chain)
7 GND
6 TXD (out)
5 NC (no connect)
4 NC (no connect)
3 RXD (in)
2 GND
1 +12V
Pin-out—VISCA Daisy chain
RJ 11 6 pins modular jack
Pin Signal name
6 GND
5 GND
4 RXD (in)
3 TXD (out)
2 Presence (12V in daisy chain)
1 GND
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Cables