Tandberg Data 1080P Security Camera User Manual


 
D14640.01—MARCH 2010
5
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents Introduction Physical interface Cables Connecti to codec Video formats Daisy chaining Appendices Contact us
www.tandberg.com
Introduction
You may already be familiar with the administrator guides
for the Profiles and Codec C–series. To help you find
the information you need, TANDBERG has split the
information into smaller and more accessible parts listed
on the right of this page.
The purpose of this document
The purpose of this document is to describe the camera
matters specific to the PrecisionHD 1080p/720p
cameras, used together with the TANDBERG endpoints.
The guide is mainly focused on the PrecisionHD 1080p
12X/4X cameras, which are used together with the Profile
42”/52”/65”, the QuickSet C20/C20plus and the Codec
C–series. Some information about the PrecisionHD 720p
is also included.
Products covered in this guide
TANDBERG PrecisionHD cameras:
TANDBERG PrecisionHD 1080p 12X/4X cameras
TANDBERG PrecisionHD 720p camera
Download the user documentation
Go to: http://www.tandberg.com/docs
Disclaimers and Notices
The objective of this documentation is to provide the
reader with assistance in using and configuring the
product. The capabilities of TANDBERG products and
other manufacturers’ products change over time and
so the required configuration may be different from
that indicated here. If you have any suggestions for
changes to this document, please feed them back
to TANDBERG through your TANDBERG Authorized
Service Representative.
If you need technical support, please contact your
TANDBERG Authorized Service Representative.
The specifications for the product and the information
in this Guide are subject to change at any time, without
notice, by TANDBERG. Every effort has been made to
supply complete and accurate information in this Guide;
however, TANDBERG assumes no responsibility or
liability for any errors or inaccuracies that may appear in
this document.
TANDBERG® is a registered trademark belonging to
Tandberg ASA. Other trademarks used in this document
are the property of their respective holders.
This Guide may be reproduced in its entirety, including
all copyright and intellectual property notices, in limited
quantities in connection with the use of this product.
Except for the limited exception set forth in the previous
sentence, no part of this Guide may be reproduced,
stored in a retrieval system, or transmitted, in any
form, or by any means, electronically, mechanically, by
photocopying, or otherwise, without the prior written
permission of TANDBERG.
www.tandberg.com
© 2010 TANDBERG
Other documents you might find useful
Video conference room primer guide
Getting started guide for Profile Series, Codec C Series, Quick Set C20
User Guide for Profile Series, Codec C Series and Quick Set C20
Administrator guide for Profiles using Codec C20 and Quick Set C20
Administrator guide for Profiles using Codec C60 and Codec C60
Administrator guide for Profiles using Codec C90 and Codec C90
Administrator guide for Codec C40
Safety instructions for Profile Series, Codec C Series and Quick Set C20
Legal information for Profile Series, Codec C Series and Quick Set C20
Camera user guide for PrecisionHD 1080p/720p
API guides for Codec C90, C60, C40
Physical interfaces guides for Codec C90, C60, C40
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Introduction