Filter
Top Products
D14640.01—MARCH 2010
17
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents Introduction Physical interface Cables Connecti to codec Video formats Daisy chaining Appendices Contact us
www.tandberg.com
Example. TANDBERG PrecisionHD 1080p 12X/4X cameras in daisy chain.
Daisy chaining of the
PrecisionHD 1080p
12X/4X
A single daisy chain with PrecisionHD 1080p
12X can have:
• Three cameras when using Codec C60.
• Seven cameras when using Codec C90.
The PrecisionHD 1080p 4X has daisy chain
support, but can only be in the end of a chain.
Locate the Extra Camera and Power
connectors.
• Power. The first camera in the chain is
powered up from the codec by the VISCA
camera control cable. Additional cameras
must use the 12V DC Power in.
• Extra camera cable. The daisy chained
cameras are connected by using the VISCA
Extra Camera cable (maximum length 20 m
/ 65.6 ft) between the Extra Camera In and
Codec Control In sockets.
• HDMI and HD-SDI. The HDMI and HD-SDI
outputs can be used simultaneously on the
same camera.
Main
camera
Second
camera
Third
camera
Power in
12V DC
Power in
12V DC
Connect to the
Camera Control
socket on the
codec.
RJ11–RJ45
HDMI out:
Connect to the
Video Input 2
on the codec
HDMI out:
Connect to the
Video Input 1
on the codec
HDMI out:
Connect to the
Video Input 3
on the codec
RJ11–RJ45
VISCA™ is a trademark of Sony Corporation
You can connect
up to three
cameras with
Codec C60 and up
to seven cameras
with Codec C90
RJ11–RJ45
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Daisy chaining