Filter
Top Products
D14640.01—MARCH 2010
8
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents Introduction Physical interface Cables Connecti to codec Video formats Daisy chaining Appendices Contact us
www.tandberg.com
The lens hood (not
mounted on the camera in
the picture) is detachable.
We recommend that you
mount it to prevent stray
light from disturbing your
video experience.
Snap it on gently.
The orange LED illuminates while in
a call and flickers when there is an
incoming call.
HDMI
• HDMI is the main video source. The maximum resolution is
720p30.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
• When the camera is used with a TANDBERG Codec, power
will be supplied through Camera Control cable.
• When the camera is used with non-TANDBERG codecs, you
may have to connect power separately.
Extra camera
If you want to connect cameras in a daisy chain*:
• The first camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
• Use an extra camera cable between the Extra Camera
sockets.
Kensington lock
The Kensington lock may be used to prevent the camera to be
moved from its place or to prevent theft.
The PrecisionHD 720p camera
HDMI
video
out
Camera
control &
Power
Kensington
lock
VISCA
Daisy
chain
Power in
12 V DC
* Not supported with Codec C20
The green LED is continuously
illuminated when power is On, but
it flickers when receiving signals
from the remote control.
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Interface