Filter
Top Products
D14640.01—MARCH 2010
12
TANDBERG PrecisionHD 1080p/720p camera
Camera User Guide
Contents Introduction Physical interface Cables Connecti to codec Video formats Daisy chaining Appendices Contact us
www.tandberg.com
Codec C20 configurations
Using the camera with Quick Set C20/C20plus
• The TANDBERG Quick Set C20, using the Codec C20,
includes the PrecisionHD 1080p 4X zoom with 1080p30
maximum resolution.
• The TANDBERG Quick Set C20plus, using the Codec C20,
includes the PrecisionHD 1080p 12X zoom with 1080p60
maximum resolution.
How to connect the camera
Connect the HDMI cable (HDMI to HDMI):
• From the HD VIDEO OUT (HDMI) connector on the camera.
• To the CAMERA (HDMI) connector on the Codec C20.
Connect the camera control cable (RJ45 to RS–232):
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C20. Visca™ protocol is supported.
Using the camera with Profile having Codec C20
The TANDBERG Profile 42”, using the Codec C20, includes the
PrecisionHD 1080p 12X zoom with 1080p60 maximum resolution.
How to connect the camera
The camera cables are pre-mounted on the Profile room systems.
Codec C40 configurations
Using the camera with Codec C40
• The TANDBERG Codec C60 includes the PrecisionHD 1080p
12X zoom with 1080p60 maximum resolution.
• The Codec C60 can also be used with PrecisionHD 720p with
1280x720p30 maximum resolution.
How to connect the camera
Connect the HDMI cable (HDMI to HDMI):
• From the HD VIDEO OUT (HDMI) connector on the camera.
• To the HDMI 1 IN (HDMI) connector on the Codec C40.
Connect the camera control cable (RJ45 to RS–232):
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C40.
Camera
control
Camera
HDMI
Camera
control
HDMI 1
Codec C60 configurations
Using the camera with Codec C60
• The TANDBERG Codec C60 includes the PrecisionHD 1080p
12X zoom with 1080p60 maximum resolution.
• The Codec C60 can also be used with PrecisionHD 720p with
1280x720p30 maximum resolution.
How to connect the camera
Connect the HDMI cable (HDMI to HDMI):
• From the HD VIDEO OUT (HDMI) connector on the camera.
• To the HDMI 1 IN (HDMI) connector on the Codec C60.
Connect the camera control cable (RJ45 to RS–232):
• From the CODEC CONTROL IN (RJ45) connector on the
camera.
• To the CAMERA CONTROL (RS–232) connector on the
Codec C60. Visca™ protocol is supported.
Using the camera with Profile having Codec C60
The TANDBERG Profile 42”/52”/65” with Codec C60 includes the
PrecisionHD 1080p 12X zoom with 1080p60 maximum resolution.
How to connect the camera
The camera cables are pre-mounted on the Profile room systems.
Camera
control
HDMI 1
Contact us
Contents
Introduction
Cables
Daisy chaining
Appendices
Physical interface
Connect to codec
Video formats
Connecting