Filter
Top Products
20
(10) PTN-GEN = Test pattern generator
Move the cursor to the position shown in fig.
Use the ▲ ▼ SELECT switches to select OFF,
COLOR, STEP, GRID, MULTI.
OFF : Test pattern is not displayed.
COLOR : Color bar signal is displayed.
STEP : Gray step signal is displayed.
GRID : Grid pattern signal is displayed.
MULTI : A simple multi-burst signal is out-
put.
ID
....................
ID-
POS
OFF
PTN
-GEN
OFF
AWB -
RNG
STD
DNR LOW
HI -RESO
OFF
BACK
EX IT CANCEL DEFAULT
COLOR STEP GRID MULTI
White
Yellow
Cyan
Green
Megenta
Red
Blue
Black
0.22MHz
0.45MHz
0.9MHz
1.8MHz
3.6MHz
7.2MHz
NOTE
• The accuracy of the signal is not guaranteed.
• To check the system operation etc., use a standard signal source.
(11) AWB-RNG = AWB control range
Move the cursor to the position shown in fig.
Use the st ▲ ▼ SELECT switches to select
STD or WIDE in the AWB-RNG setting.
Set the color temperature tracking range of
the white balance auto mode.
STD : The camera is applicable to a color
tempera true range of 2500-10k
WIDE : Wider than the STD settings.
NOTE
• When switching from WIDE to STD setting, turn off and on the camera to
clear the setting.
ID
....................
ID-
POS
OFF
PTN
-GEN
OFF
AWB -
RNG
STD
DNR LOW
HI -RESO
OFF
BACK
EX IT CANCEL DEFAULT