Filter
Top Products
37
When using static IP address to log in to the IP Camera, you can access it either
through Surveillix Device search software or type the IP address directly in the Address
bar of your internet browser.
General
IP address – The IP Address is necessary for network identification.
Subnet mask – Used to determine if the destination is in the same subnet. The
default value is 255.255.255.0.
Default gateway – Used to forward frames to destinations on different subnets or
for internet access.
Primary DNS – The primary domain name server that translates hostnames into IP
addresses.
Secondary DNS – A secondary domain name server that backups the primary
DNS.
Advanced
Web Server port – Defines the port that Internet Explorer uses to connect over the
web and view video. If this port is changed then the new port must be defined when
attempting to web connect (ex: if your camera’s IP address is 192.168.0.100 and
you change the web port to 8001, then you must type http://192.168.0.100:8001 in
your browser).
Note This is also the port used in Surveillix Server Software.
RTSP port – The default RTSP port is 554; setting range: 1024 ~65535.
MJPEG over HTTP port – The default HTTP Port is 8008; setting range: 1024
~65535.
HTTPS port – The default HTTPS Port is 443; setting range: 1024 ~65535.
Note No port number can be used in duplication on more than one item.
IPv6 Address Configuration
To enable IPv6 select Enable IPv6 and click Save. See your network administrator if
you are unsure of your network configuration.