Filter
Top Products
19
5
USING THE CAMERA
You can access and manage the camera through: 1) a web
browser, and 2) the enclosed software IPView SE. This chapter
describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
The camera must be configured through its built-in Web-based
Configuration. (Extensive knowledge of LAN will be helpful in
setting up the camera.)
From the web browser, enter the default IP address to access the
Welcome screen of the camera. To configure your camera, type
http://192.168.0.20 in the address box. The number is the default
IP address of your camera. Then, press [Enter].
NOTE: The computer’s IP address must correspond with the
camera’s IP address in the same segment for the two devices
to communicate.