Filter
Top Products
49
Storing the Position
You can store the position(s) that you want to monitor, so that
you can quickly move the camera’s lens to focus on the object
that you want. You can store up to 24 positions in the camera
(the number “0” is for default position “Home”). To store the
current position, select the setting number (1~24) from the pull-
down list, and then click Set. You can enter the name for the
position in the following box.
To remove the stored position, select the position that you want to
remove, and then click Clear.
When you have stored the position in the camera, select the
number (position) from the pull-down list, and then click Go To.
The camera’s lens will move to the position immediately.
Swinging the Camera
The camera can swing automatically between the stored positions.
Once you have stored two (or more) positions in the camera, click
Swing will have the camera swing from one position to another
position. Click Stop to stop swinging.