Filter
Top Products
Installation and Operation Guide
55
5.1.5 Change the Application Setting
Please follow the steps below to change the application setting through the network as necessary.
Change the Application Setting — FTP Application Setting (MJPEG mode only).
Please follow the steps below to change the FTP setting via the network as necessary to upload
recording data live. (*FTP function is for PAL version only.)
1. Click on the Application button on the home page to enter the “FTP Application Setting” page
(default).
2. Enter the required number of images you wish to set in "Pre - Alarm Memory Buffer" and "Alarm
Memory Buffer respectively" in their corresponding blank spaces within the Storage Settings.
3. Enter the "Upload Rate" you have chosen.
4. Click "Submit" after each of the above entries for their settings.
5. Click on the “Home” button to return to the home page.
Description of function keys:
Pre – Alarm Memory Buffer: Fixes the desired number of images to prelude an alarm.
Alarm Memory Buffer: Determines the selected length of the image buffer after an alarm.
Upload Rates: Sets the upload speed rate.