Filter
Top Products
20
Troubleshooting Camera Pairing
Consult the following table for camera pairing troubleshooting suggestions:
the camera’s signal status icon
shows no bars
• making sure the camera is plugged in and the red LED is on.
• making sure that the camera’s antenna is attached and the
monitor’s antenna is extended.
• making sure the camera is paired to the correct channel.
• re-pairing the camera and monitor.
the camera’s signal status icon
shows one or two bars or the
video quality is poor
See “General Guidelines” on page 9 to improve video quality.
the camera won’t pair with the
monitor
• making sure the camera is plugged in and the red LED is on.
• pressing and releasing the pairing button quickly. Do not press
and hold the pairing button.