32
4. Enter your security code. You can switch the keyboard from alphabetical characters to
numbers/symbols and back by tapping the field to the left of the space bar. Tap
ENTER
. The
Security Code
screen displays again.
You must enter a security code to monitor your video from a PC or other device.
5. Tap
OK
on the system reboot prompt. The
Network Setup
screen displays.
6. Turn your Uniden Guardian monitor off then back on for the security code change to take
effect.
Network Information Screen
1. Tap
Network Information
to display the
Network Information
screen.
2. Tap the arrow to return to the previous screen.
The DID is a unique code specific to your monitor and is required (along with the security code)
to gain remote access to your cameras over the internet. The information in the DHCP setting is
assigned to your monitor from your home router.