Filter
Top Products
13
camera.
1. For far or mountain settings push the Micro/Normal switch down.
2. For up close settings push the Micro/Normal switch up.
The mountain setting gives you maximum depth-of-field you can possibly get with the lens you are using. You
now can have the overhead branch in focus as well as the mountains in focus - and everything in between!
Flash
Your camera has a built in f l a s h f u n c t io n which enables you to take photos when the light condition is not good.
1. Press the Up button.
2. Press the Up button once until you see the icon appear on the LCD screen. This indicates that
the flash is forced on.
3. Press the Up button again to change to the auto flash function.
4. The icon will appear at the top of the LCD indicating that the auto flash is turned on and ready to
use.
5. Press the Up button again to change from the auto flash to the red eye function.
6. The icon will appear on the LCD indicating that the red eye reduction function has been
activated.
7. To turn off the flash function, press the Up button again until the icon is displayed on the LCD.
Note: A “Low Power” message will appear on the LCD screen, if you select the flash function when the battery