Filter
Top Products
7
1. Push the black battery cover lever up for the battery door to spring open.
2. Locate the SD card slot to the left of the battery compartment.
3. Insert the SD memory card correctly in the direction shown.
4. Press the memory card until you hear a “Click” sound.
Note: After you insert an SD memory card, the SD card icon will appear on the top
left of the LCD, indicating that your SD memory card has been installed
successfully. The media you capture will now be stored on the card and not in the
internal memory.
x This product supports SD cards of up to 8GB.
x Make sure that the card is not locked. Locked cards do not allow media
transfer.
x Formatting will delete all data on the SD Memory Card.
x Download all the media to your computer before you format the card.
x Do not remove the SD Memory Card during formatting as this may damage
the card and render it unusable.
x Before using the camcorder, be sure to format the card with the camcorder
(see the Setup section further on the manual for instruction on how to format
the card).
Maintenance and Care
Before using the video camcorder, please ensure that you read and understand
the safety precautions described below:
x This camcorder can be used underwater to 10 feet, when there is the
Phenomenon of water leaking into the camcorder, the camcorder working
properly, this is normal.
x Once use the camcorder in the sea, clean the camcorder with clean water after
using, and put in a dry place, so that the water inside the camcorder dry.
x On Lifting and opening the LCD screen, be careful not to over rotate the screen.
x Direct sunlight might cause damage to the camcorder.
x Only clean the lens and LCD with a soft cloth.
x Do not store the camcorder in temperatures above 4ć
x Condensation may appear with sudden changes in temperature. Take care to