Filter
Top Products
Taking Pictures
20
(Turn off the LCD screen)
Taking a picture
There are two Camera Working Modes for you to take a picture. In the
Auto Mode, all you have to do is to press the shutter button and let the
camera judges the environment conditions for you. In the Manual Mode,
you can manually adjust the exposure and set the white balance based
on different environment condition.
If you don’t insert the SD card into the camera, you can take the pictures
and storage them into the on board memory. If you insert the SD card
into the camera, you can access the SD card only. You can ‘t access the
SD card and the on board memory at the same time.
Taking a Picture in Auto Mode
1. Select the Mode dial to Auto ( ).
2. Press the POWER button ( ) to power on the camera.
3. Press Shutter button half way and align the auto focus mark on the
subject you want to take. When the focus is locked, the auto focus
mark turns into green.
4. Take a picture by pressing the shutter button further. When it makes a
sound, the image has been taken and will be recorded on the card
or on board memory.
* The beep will not sound if the beeper setting is turn off.
5. During recording to the memory card, the LED indicator will flash in
Green. Once the LED indicator stops flashing, the recording has
finished.