Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
44 - User's Manual
■ Maximum frame rate
This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video
quality.
If the power line frequency is set to 50Hz, the frame rates are selectable at the following rates: 1fps,
2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps and 25fps. If the power line frequency is set to 60Hz, the
frame rates are selectable at the following rates: 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps,
25fps and 30fps.
■ Video quality
The video qualities are selectable at the following settings: Medium, Standard, Good, Detailed and
Excellent.
Disable IR LED:
If you don’t want to let others know that the network camera is on, you can select this option to turn off
the LED illuminators. This will prevent the Network Camera’s operation from being noticed.
Audio settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note
that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio
transmission is enabled in the Client Settings page. In that case, the following message is displayed.
Input gain: There are two options for external microphone input gain, 0db and 20db.
Audio type: Select audio codec AAC or GSM-AMR and the bit rate.
■ AAC targets at performing good sound quality at the cost of higher bandwidth consumption. The bit
rates are selectable at the following rates: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps and128Kbps.
■ GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are
selectable at the following rates: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps,
10.2Kbps and 12.2Kbps.
When completed with the settings on this page, click Save to take effect.