Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 47
Camera control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by connecting with a
PTZ driver or scanner via RS485 interface.
RS485 Settings
Disable: Select this option to disable this function.
PTZ camera: Select this option to enable PTZ operation.
To utilize this feature, please connect the Network Camera with a PTZ driver or scanner via RS485
interface first. And then you can configure the PTZ driver and RS485 port settings in the following
diagram.
VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D protocol.
If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom camera
(scanner). please refer to the user’s manual of your PTZ scanner to set the Camera ID, PTZ driver, and
Port settings. The Camera ID is necessary for multiple cameras control. If you select PTZ camera and
click Save to enable this function, the camera control panel will be displayed in the main page as the
following diagram:
http://192.168.5.132/index.html
Network Camera