Vivotek 4X-IP7142 Security Camera User Manual


 
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
90 - User's Manual
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <system information length>\r\n
\r\n
Model=<model name of server>\r\n
CapVersion=0200\r\n
Parameter Value Description
Model system.firmwareversion Model name of server. Ex:IP3133-VVTK-0100a
CapVersion
MMmm, MM is major
version from 00 ~ 99
mm is minor version from
00 ~ 99
ex: 0100
The capability field version
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=<value>&[start=<ipaddress>&end=<ipaddress>]
[&index=<value>][&return=<return page>]
Parameter Value Description
Method
addallow
Add a set of allow IP address range to server. Start and
end parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
adddeny
Add a set of deny IP address range to server. Start and
end parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
deleteallow
Remove a set of allow IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority than the [index] parameter.
deletedeny
Remove a set of deny IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority than the [index] parameter.
start <ip address> The start IP address to add or to delete.
end <ip address> The end IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.